Use Mianshaozhuanji equipment can be said to us into an era of mechanized brick, which is an important sign of the times. In particular, this brick-making process, compared to traditional brick process easier, the entire production process, eliminating the step of traditional firing at full mechanization of production, we only need to table a reasonable operation and control, it is possible to produce a very high number of unburned.
Unburned block brick to maintain stable operation, operating system can not be ignored is a link in the daily operation of brick should note the following details:
1, if found excessive flow, does not meet the requirements, or need a short minor traffic throttling device can be used to adjust.
2, on the subject of the sensitivity of the thermometer and oil checked regularly and should be controlled within the bearing housing oil level within the allowable range.
3, in the car, parking or operation of process equipment, found irregularities, should be checked immediately.
4, the inspection found little fault, it is timely to identify the cause, try to eliminate or deal with, such as small fault can not be eliminated, or find big failure, should be checked immediately.
5, except after each overhaul, replace the lubricant, the lubricant should be changed regularly.
6, bearing drive regularly (quarterly) inspection, cleaning and additional lubricant to prevent bearing burn.
In order to avoid the occurrence of improper maintenance caused by human error occurs, prevention equipment and motor aspects of natural faults and incidents, to maximize the performance of the equipment, extend equipment life, we must strengthen the maintenance of equipment, which are to be noted to.

    Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.