Cement pipe machinery attention to regular checks lubricating oil, hydraulic oil, coolant, oil level and quality, and to pay attention to check the tightness of the machine. Inspection found that a lack of too much oil, you should analyze the reasons. Meanwhile, should strengthen the lubrication of lubrication points, recommended run-in period, every week for filling grease lubrication points (except for special requirements). Vertical gear pump with a pump rotation direction of attention then the power, clockwise to the right.

      Then, using cement pipe machinery note:

      A reasonable selection of lubricants, especially the input power greater than 11KW motor shall bear the load gear oil. 2, the end of the run-in period, cement pipe machinery to deal with mandatory maintenance, cement pipe inspection and adjustment of machinery to do the work, taking care to replace the oil.

       3, should always check the cement pipe machinery lubrication points, fasteners and other parts.

       4, air filters, coolers, tanks and filters should be regularly cleaned, so that the oil flow.

       5, cement pipe mechanical pipe systems generally use 20 #, 30 # hydraulic oils.

       6, hydraulic oil to do the right oil temperature 30-55 degrees, prohibit the boot when the oil temperature is below 15 degrees or above 60 degrees; to regulate oil, you can use a heater or cooler.

       7, hydraulic oil is generally replaced every six months, to thoroughly clean the tank, replace the tubing. Tuck oil pressure metamorphism, dirty system noise will increase, reducing the pump, cylinder, valve and other life, and even paralyze the whole system, you must always pay attention.

       Shandong Sheng Machinery Co., Ltd. has been dedicated sub-cement products machinery research and development, production and sales, with advanced equipment, superb technology and two years of professional experience, the company has always been at the forefront of research and development center block making machine market development , watching the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.