Mianshaozhuanji after prolonged use should pay special attention to the daily inspection and maintenance to ensure the normal operation of the machine, in the inspection and maintenance should pay attention to the following points:
   1, should always check the brick mold size and welding binding site conditions. Because the project is to rely on the production of unburned high pressure to achieve, then it is impossible to have a solid weld cracks do not appear, together with the friction material is to accelerate the formation of cracks, so always check the binding site to prevent the formation of welding cracks. Another point to note is to use a suitable mold, the mold must be suited to the size of the indenter. 
   2, brick mold to replace the old and new problems. Although mold is made ​​of steel with high hardness, but can not represent will not be damaged, especially in some relatively high precision molds, so when replacing old molds must not let die by the collision, bump, to prevent die variant, affecting the quality of unburned.
   3, pay attention to the gap adjusting each running plane. After the machine running for some time, the gap between each run flat minor changes will inevitably occur, it is necessary to adjust the time gap between these planes, especially the head and skip the plane of motion, the pressure head and mold cores, mold frame with wire board the gap between not appear the slightest deviation, because brick is running under high pressure, if there is bias, will inevitably cause friction see each plane, which would damage the individual plane, so that the production of the unburned minor deformation.
   4, note that brick mold routine maintenance. After replacing the brick machine dies down, to clean water, to use soft cleaning tool, you can not use a hard object percussion. After washing to dry in the shade, do not put heavy pressure on it to prevent deformation.
   Shandong Sheng Machinery Co., Ltd. has been dedicated sub-cement products machinery research and development, production and sales, with advanced equipment, superb technology and two years of professional experience, the company has always been at the forefront of research and development center block making machine market development , watching the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.