Regular inspection and maintenance of presses:
   Maintenance clutch, brakes: To ensure the clutch, brake action smooth and accurate clearance friction disc must be aligned. Gap is too large will delay action time, seal wear is reported to be the gas increases, causing adverse effects; gap is too small, or the friction disk slidably spline shaft gear poor elastic return breakage expenses, will cause the clutch brake is disengaged , the friction disc cover touch each other, resulting in friction sound, causing fever, the friction pad wear, and the main motor current detection increases, the friction disc from the bad. There may even be a secondary slide whereabouts phenomenon.
   Clutch, brake action to accurately specify the stop position to take advantage of the error of ± 5 'or less as well as beyond, we must tune pick. Then you should check: exploration piece brake friction wear, action is bad; clutch, brake friction plate is attached to the oil; cylinder piston seal leak reported whether the mill; whether changes in air pressure; timing chain brake and clutch are being disrupted. therefore, inspection and maintenance of its operating circuit operation, rotary cam switches, solenoid valves and air source are all very necessary.

   Other classes loose ends tied amendment: each part of the end plug (including mounting bolts attached devices) is loose, it should regularly check the matter and, if loose should be tightened immediately. Presses stamping operations. Reported move large, especially high-speed presses, high frequency vibration, loose bolts quickly. Loose bolts often caused by unexpected accidents, must be taken seriously.

   Overhaul oil installations: the relative rotation and sliding portion of each press if given the lack of oil, natural causes burning, failure. Therefore. Should always carefully check the oil supply situation. To keep it in good condition.
   First check the fuel tank, oil tank, oil cup, oil pump, etc. are the most abundant, with or without the dirt; Secondly, check each face oiling parts, pipelines, fittings or without Chau oil, if any, need to immediately turn the oil seal replacement. Once the adhesive pulls out of oil on the clutch or brake, the shape affect its function, resulting in dangerous, it should pay particular attention. In addition, cleaning, oil mist before the solenoid valve installed up the oil, oil filter drip lubricator is most appropriate, matters are not missing.

    The purpose of regular maintenance is through daily, weekly, monthly, every six months or a year of inspection, maintenance, so the press is always maintained in good condition, to ensure the normal operation of the press and ensuring operator safety.