Cement brick machine wiring, can be divided into internal electrical wiring and ground cover. Shell ground primarily used to prevent static electricity, such as the accumulation of leakage, outdoor cement brick machine also particularly want to install an external lightning protection measures.

Cement brick machine wiring work should pay attention to what?

1, cement brick machine, depending on the wiring work site environment, local 220VAC switch selectable 24VAC, or remote transformer, centralized power supply. When centralized power, should take full account of the power transmission line loss.

2, cement brick machine wiring work should be taken to select the output power of a larger pad molding equipment and an appropriate increase in the output voltage to carry the line drop.

3, cement brick machine wiring work should be noted that if the cement brick machine has sufficient 8:54:15 electric drive? By multimeter test method is to open the case load measured with a multimeter dome end of the power line voltage, the voltage is within the observation cement brick machine permitted range.

4 outdoor cement brick machine when the heater is started or stopped, the power consumed by far, be sure to consider the harshest environments in the maximum power required when the outdoor cement brick machine powered.

Wiring cement brick machine is divided into internal electrical wiring and wiring enclosure. Shell terminal is mainly used to prevent accumulation of static electricity, electrical leakage and other outdoor cement brick machine also particularly want to install an external lightning protection measures.

Generally, installed outdoors because the ball is connected to the wiring fault protection of rotating machines metal stents have been formed naturally can not do special processing on pole bracket shell. Even if the device effectively closed loop wiring circuit wiring, but different cement brick machine zero and the central part between the potential divergent positions, no power load balancing, will rise to the surface potential difference.