Brick machine suddenly stopped working when the bricks in the suppression of the phenomenon . Typically, brick machine in the event of a sudden stop working fault , because we are often   caused by too much filler , so at this time we should check whether the excess filler , if yes, remove excess filler can ; If not fill excess capacity, so shall promptly inspect the die hole , to see whether it is because there is a hard thing to fall into the machine stopped caused .
  Mianshaozhuanji rotary machine to function properly , but the wheel does not move . If the rotary part of the brick machine appeared turntable does not move, it is possible that there is a spring breakage , or that there is a card automatically generated excessive head wear . This time only need to replace the head of the spring or automatic card can solve the problem .
  Brick machine at work , vibration phenomenon occurs when the rotation of the market turning. When working in a brick machine , if there is a big shock , it may be the distance between the back wheel and automatic card is too large , note cards, and you want to automatically dial back the distance between the adjustment to a millimeter range within ; If the problem is not due to the distance , then it is probably not flexible rolling the roller on the mold , this time only need to replace the roller jammed problem can be solved .
  Mianshaozhuanji suppress the thickness of thin brick embryo , usually caused by two reasons : one is due to the lubrication is not smooth and led back to the turntable suppressed the push piece brings excessive wear ; another is due ya brick machine brick machine in the position of the eccentric shaft in the wrong tone . Therefore, such situations arise , we must promptly check knurled condition , replacement of worn gone, and adjust the position of the eccentric shaft .