SY1-10 hydraulic cut machine wins Asia Machinery Co., Ltd. is based on current market demand at home and abroad with the latest development of a perfect design, reasonable structure, smooth operation and stable performance characteristics of small hydraulic block making machine . Simplicity of its operation , the action quickly and accurately in place, smooth out the turn , make you a glance.
   Although the machine compact, but the replacement of mold can produce several kinds of brick . Its rapid disassembly , lightweight and flexible, easy to master.
  Hydraulic cylinder and pump systems , control systems are the domestic first-class manufacturers . Its good results already obtained using the reputation of the majority of users .
  Use and operation :
  First, turn on the external power supply , close the combination switch, current indicator light.
  Second, the observation confirmed the absence of obstacles around the motor case : motor start button is pressed . At this current indicator light, the motor starts running. Hydraulic oil began to enter the system. In the case of a cylinder is not connected to any channel , hydraulic oil through the oil return pipe directly back to the fuel tank inside. At this point the system enters the pre- operation state .
  Third, open the compacted cylinder return channel , so that the fuel tank back to the ending point , then you can begin to open the discharge cylinder discharge . Subject to the fuel tank when the material forward to the end, return to the starting point of the cylinder immediately stop oil supply . In this case the material function is completed , the grant hopper is full. At this point you can start the compaction cylinder .
  Fourth, start compacting the material for pressurized tanks : Subject to conditions to be completed prior to compaction height of 5-10mm , the machine gauge began to move, requiring only a second time , the pressure rises 16mpa scale , this time the fuel tank travel all be finished, compacted height of the brick , which completed the compaction process.
  Fifth, the hydraulic control lever to push the opposite direction , rising from Bianxiang cylinder and starts stripping mechanism bricks from the top of the mold , which was performed at the compaction process.
Sixth, manually pressed onto the truck a good brick yard , a pressed brick program ends. And get the next discharge process. And so forth to achieve continuous production .