Shandong Sheng Asia Machinery Co., Ltd. specializing in the production of various types of brick machine, baking free brick machine, brick machine, hollow brick, road brick, brick making equipment manufacturers old.
Notice the use of cement brick:
1 non trained staff, not a separate operation of cement brick.
2. The operator must, without exception, carefully read and understand the cement brick machine operation manual, for the press machine, electricity, liquid principle, for compressor installation, commissioning, operation, maintenance and repairs have in-depth understanding, and through the existing operation training, through a special assessment, confirm and its capacity can be competent for this job, quasi operational cement brick machine.
3. The hydraulic oil quality, cleanliness and viscosity determines the reliability of cement brick machine hydraulic system, and cement brick machine efficiency, life and economy.
4 note to the tank should be used when the filter of 10 micron, absolutely not allowed without direct oil filtering device.
The lowest temperature allowed 5 cement brick machine system is 25 DEG C. The optimum operating temperature is 35 -45, and the system is unfavorable for more than 45. If more than the provisions of the examination value system should promptly eliminate.
6 in order to ensure the normal operation of the electrical system, the voltage stability must be maintained, and its fluctuation value should not exceed or lower than the rated voltage of 5-10%.
7 electrical cabinet, junction box, operating table door or lid in the machine work must be closed or cover, are not allowed to open the use of, so as to avoid fouling.
. when malfunction of hydraulic system (for example action is not normal, unstable oil pressure, oil pressure is too low, vibration, temperature increase fast, timely analysis of the reasons, troubleshooting, does not allow the machine to work sick, cause major accidents.
Shandong wins Asia Machinery Co., Ltd. has been committed to the cement products machinery R & D, production and sales, with advanced equipment, exquisite professional technology and twenty years of practical experience, R & D center is always in the forefront of block forming machine market development, pay close attention to domestic and foreign advanced technology developed for different user demand for investment products, the main building block forming machine, hydraulic flower brick machine, cement pipe machine, mixer, suspended roller machine, wire rod machine equipment. At present, there are 19 offices and 8 foreign factories (Nigeria, Tanzania,, Kenya, Ethiopia, Cameroon, Algeria, Congo, Ivory Coast) and exported more than 100 countries and regions.