Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
     Brick equipment production Common Problems:
1, intrapartum loose brick tile, brick fracture phenomena, or the upper mold under its own mold when lifting off with bricks, because the head pressure is too low; (the head pressure is too low, brick positioning can not be cause loose tile on the ram cylinder tubing should be corresponding pressure regulator gradually turn up alone, at the same time gently lifting the lower mold die wrench move on, so that the upper ram cylinder to maintain a certain pressure can be maintained Under the brick mold does not rise along with the mold, thereby reducing the breakage rate of brick)
2, cement brick, fluid press, color brick machine, pad machine when producing brick bricks found in the middle of the bulge, because the ram cylinder pressure is too high, or the vibration time is too short, failed to press the upper mold place; (if found damaged bricks high, irregular, should pay attention to light when put in the ejector, or check the humidity and the ratio of the aggregate, as too wet, the performance when a brick brick will be pushed out a lot of water, such as too dry, the performance of brick shapeless, not a brick)
3. The regulator failure, because the pressure within the pressure regulating valve spring damage or failure; (it should be replaced the same types of pressure spring); cylinder fuel tank leakage is found, because the loss of the cylinder seals sealing effect ; (should replace the corresponding type of seals)
4, the use of equipment and more emphasis on care and maintenance, so as to reduce maintenance, thus more qualified products; operation of customer specific issues should carefully read the product manual, after the read implementation of the action, in order to cement brick, brick hydraulic machine, color brick machine, pad machine smooth and comfortable to use, give full play to the superiority of the device, extending its life.
Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sales, with advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development , concerned about the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.