Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
      Color brick machine equipment installation and maintenance of:
1, before using the color brick machine should always regulator can not be adjusted to the motor suffocated or labored too large. First turnover board put to concave mold bottom, then start the motor, the lever under pressure mold under pressure to observe the degree of damping blocks should be 2-3mm below the pressure is too large, the adjustment should be counter-clockwise under the pressure valve, such as Under pressure damping block is too small, you should adjust under the pressure valve clockwise until transferred to the appropriate travel date, after debugging qualified, on the plane and then feed hopper feed plate bracket raised concave mold with flat, debugging qualified after Ministries screw detention, to see whether you can scrape material above the lower mold.
2, when debugging a brick, you should first check whether the pressure head on the cylinder pressure is too high, as too should adjust counterclockwise line relief valve on the cylinder until the brick has strength as well, such as ejector, because of the head pressure is too low, brick tile positioning will result not loose, you should adjust clockwise on the cylinder relief valve piping, or mold in the mention of the lower die while gently moving the punch wrench, so upper ram cylinder to maintain a certain pressure can be maintained in the die does not rise along with the brick mold, thereby reducing the breakage rate brick.
3. The regulator failure, should advance check your pressure regulator spring is damaged, if damaged should be replaced.
Tile machine equipment to achieve the combination of the pressure transducer, the product height and density dual-control function. Tile machine has a small, exciting force, simple operation, easy maintenance, reliable operation, etc., is an economical, using advanced tile brick equipment.
Not only can produce color pavers, colored tiles, also can produce bread brick, standard bricks, hollow blocks, curbs and so on. ʱ??
     Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sales, with advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development , concerned about the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.