Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
    Cause and Solution cement brick sent to board aircraft machine may occur:
1. Symptom: cement brick sent to board the frame often Cato board.
① Cause: cement brick pallet size is not standard.
Workaround: pick substandard pallets, eliminating the use.
② Cause: frame width adjustment is too narrow.
Workaround: Adjust the frame width to the appropriate location.
③ Cause: cement brick pallet height is too low or too thick frame of the front panel ports, blocking pallets.
Workaround: elevate the height of the front frame plate opening.
2. Symptom: cement brick pallet is sent to board at the front end of the regular card board.
① Cause: cement brick sent to board aircraft displacement, sent to board aircraft in line with the center line of no vibration table centerline.
Workaround: Adjust sent to board aircraft, making it consistent with the centerline of the shaking table.
② Cause: cement brick sent to board the front edge of the bezel deformation.
Workaround: Correct the bezel, or reinforcement.
③ Cause: Two brick sent to board the front of the cement first pawl not on the same plane.
Workaround: Adjust sent to board aircraft inner frame or pad level two pawl sent to board aircraft, so that in the same plane.
3. Symptom: cement brick sent to board at the time of delivery board, sending is not in place (or two pallets together sent).
① Cause: cement brick sent to board pawl rust, no return.
Remedy: Remove sent to board pawl spindle and pawl treated to make it flexible return and regularly add oil lubrication.
② Cause: send cement brick brick pallet support plate wear, below the upper surface of the inner frame support plate, resulting sent to board at the front pallets back to back, causing the pawl can not be sent to board return .
Solution: Replace the support plate wear strips, so that the height of the plane above the upper edge of the inner frame support plate. If it is the impact deformation within the frame of the support plate, the support frame can be restored.
Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sale of advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.