Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
     Color cement brick in the production process, a customer fabric layer reflecting crater, looks very beautiful, cause such reasons are as follows, I hope you reference contrast, find the real cause of their own.
1. to look under the car long row of brush material is not worn, not the pressure head cleaned of residual material, and if so, would be replaced long row brush.
2. Check the base material particles, to see the end of material particles is not too rough, if it is too thick, it will highlight when forming the fabric layer to the surface, causing the fabric layer pit, according to the technician to explain the size selection of raw materials.
3. Check the pit under the fabric, see if it is too light. The solution, adjusting long colored cement brick fabric preload (pre vibration) of time, increasing the depth of the fabric of the pit. If you increase the preload time fabric, the fabric is no way to increase the depth of the pit, raking time by reducing or cutting pre-up time reduced, thereby reducing the primer.
Space vehicle frame surface and mask surfaces 4. facie coarse material is not too large, resulting in residual material left in the mask surface material car returned. The solution to check cement brick pallet (when pallet uneven thickness, will roughage large, sometimes small gap underneath the box surface and mask surfaces, leaving residual material.) Adjust the height of the material and the rail car level, so that the material beneath the table plate and the surface level car mold frame; skip bottom wear strips or wear mask surface wear, repair or replace the mask surface material vehicle wear strips. Without affecting production, in the mixing process, try to increase the base material and humidity, can reduce the residual material mold box.
5. Failure Cause: color cement brick at the end of cloth material, raking too long, after the coarse material covered, from the colored cement brick material underneath the gap between the surface and the module frame overflow, leading to mask surface residue too much material. The solution, as low as possible raking time.
Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sale of advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.