Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
Mianshaozhuanji failure causes and solutions:
    PRESS Passed a boring car parking which happened

Because too much filler, die hard objects falling into the hole

The piston rises while adjusting the appropriate depth or eliminate hard object feeding

    2 turntable rotating mechanism functioning but does not move

Automatic card spring break and malfunction 2, automatic card excessive head wear

Replace the spring 2, replace the automatic card

   3 rotary tape rolling vibration

1) between the card and automatically dial back a greater impact

2), a roller die on the track is not working on the move

1), adjust the automatic card with the broader market space is not more than 1 mm below

2) Repair or replacement stuck roller

    4 press out a small brick thickness

1), caused by poor lubrication back wheel under the thrust piece, excessive wear

2) differences PRESS eccentric shaft position adjusting mechanism suitability

1) improved lubrication, if pushed too large blade wear should be replaced

2), align the eccentric shaft to the right temperature until

    5 press out the full thickness of the larger brick

1), the pressure piston roof tiles wear

2), all bearing structure PRESS excessive wear

3), with the broader market pressure parts underside gap is too large

4), the bottom of the mold excessive wear

1) If you can not keep adjusting the eccentric shaft is replaced with a new plate

2) Adjust the shaft member to make pressure parts wedge above the bottom surface of the tape gap 0.5 mm

3) repair mold bottom plane

   6 individual adobe brick heavier than normal

Individual mold roller channeling too much damage resulting packing depth increases

Replace the mold wheel

   Moment of the crankshaft and transmission shaft vibration pressed bricks 7

Gear worn unevenly

After a change in the direction of the fixed ring gear on the crankshaft that half turn
Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.