Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
    Do maintenance and repair work, you can increase productivity hollow brick, procedure is as follows, first boot the normal operation of 15 days, it must be replaced inside the hollow brick vibration gear oil. Replacing ways: first vibrating bottom drain screw loose, put the original box complete vibration gear oil; tighten the oil drain screw, the equivalent amount of diesel fuel into the tank; empty machine running five minutes later, loosen the screw hole, The clean diesel release; fastening screws put oil, add some clean gear oil.
Hollow brick boot normal operation after 15 days, you must wear hydraulic oil hydraulic system extraction, wash with clean diesel fuel storage tanks, valve and oil blocks, then filtered hydraulic oil tank re-injected back into the reservoir. The new hollow brick through the run, you can play the best performance. Recommend hollow brick commissioning into operation, there must be a 15-day run-in period, all-speed operation six hours a day. After normal use.
The use of hollow brick mold should always check the size and condition of the binding site welding, if you find the site with the seam weld cracks should be repaired, and if found to be adjusted aggregate size when excessive wear, excessive wear and tear film will affect the quality of the products , this would need to reprovision a new mold. Install or replace the old and new mold, be sure to avoid conflict violated, bump, civilization assembly, pay attention to the protection of the mold; Also to avoid burning brick comprehensive swabbing work, but also the relative sliding movement of the various parts of the pre-test machine The site designated by lubrication.
Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.