Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
        After the run-in period Mianshaozhuanji spend every day we need to do the necessary checks, so you can provide efficiency. Here to give you a few summary:
       A check every bolt tightness Mianshaozhuanji various parts, particularly the oscillator parts, oscillating motor belt is often required for viewing, if worn, slipping, relaxation and other representation, should be replaced or adjusted, such as excessive wear Pulley , should be promptly replaced.
2, pay attention to the situation on the platen sticky material, often finishing, finishing should be shut down if necessary.
3, the operation Mianshaozhuanji safe list, during operation, must not put his hand to mold box and contact moving parts.
4, in the brick machine to replace mold and other conditions, it is necessary to Diaozhu upper die with a rope, to avoid a sudden decline.
5, the hydraulic oil necessary to clean the system, to prohibit incorporation of impurities, often oil level, oil temperature, the temperature level is low, making up the hydraulic oil, a month after the first use, the oil should be replaced or filtered out, in order to avoid the system processing of iron and other remnants of the bottom of the tank can be placed adsorption magnet (for adsorption iron).
      6, often insist on cleaning brick machine guide posts and other moving parts, smooth.
7, in the conservation of the machine, the axial oscillation axis traverse no larger than 2mm, not reverse motor rotation (direction of arrow)
8, when there stuck representation, it is necessary to first line directional valve closed, turn off the pump, and then disposed of, prohibit the disposal of stuck appearance when pulled directional valve.
9, a day after the end of the job, you should Mianshaozhuanji brushing, dry, add oil painted smooth, otherwise difficult to wipe the hard concrete knot. Do not use water when washing machine, due to the internal machine is equipped with appliances, washed with water, and can be easily damaged equipment, and easy to cause an accident.
10, in strict accordance with the needs of fuel, lubricating oil filling volume oscillator to pan up 45-50mm height dipstick regularly (monthly) View normal use within the oscillator smooth oil has losses, it is necessary to timely remedy.
11, when replacing valves, pipes and other hydraulic parts, piston cylinder should all put to the lowest point, to avoid injection and mold decline at the end of the job, you should put a plank on the humble mold, the mold will fall, the pressure in on board.

  Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.