Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
With the rapid development of power industry, has brought a sharp increase in fly ash emissions, coal-fired power plant fly ash total annual emissions increased year by year, now fly through tests, their physical and chemical properties completely can be used for the production of aerated concrete standard bricks and fly ash bricks of new wall materials standards
So, fly ash brick production standard precautions

1, the production of fly ash cement ratio of standard bricks note setting. Only be determined after the sixth because of the ash components are added as concrete, on the basis of theoretical calculations to be on trial and error.
    2, the implementation of secondary mixing new technology, namely dry after mixing with water stirred 1min 2min ~ 3min.
    3, note that standard bricks fly adjustment device molding, fabric, vibration of the parameters, once determined, do not easily change, otherwise it will affect the quality of the products.
   4, when the ash try to control the height of standard brick molding at 115 + 2 or 115-4 (standard 115 ± 4), if we take 115 + 4:00, no 240mm mortar joint masonry walls to speak of, it will affect the building strength.
   5, if you use wood pallets, wood pallets to make sure the surface remains flat, otherwise the standard brick on the same wooden pallets, height errors.
   6, when the steam curing, note the change of seasons, timely adjustment of the static stop time, steam temperature, cooling rate and other parameters of conservation, there would be the product surface cracking phenomenon.
   7, fly ash brick products marked on the product after steam curing yard after going pouring water, must be irrigated. Because the strength of low pressure steam curing time can only reach about 70 percent, an increase of fly ash concrete late strength needed moisture.  

  Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.