Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
      When manipulating Sand, if not accurate manipulation, is likely to float to the surface of unnecessary accidents, are considered capable of ensuring that machinery and equipment kept in good condition and ensure safe production, reduce occupational safety and health hazards, safety manipulate certain Sand can not be ignored, the following will give you a brief introduction about operating matters Sand to note:
1, check before driving tune whirl chamber door is closed tightly observed;
2, check the impeller rotation direction, as viewed from the discharge port. Impeller should counterclockwise to scroll, or should adjust electric motor wiring;
3, Sand necessary load to start, to be operating normally before feeding Sand, Sand and transportation equipment startup sequence is: Sand → → nesting feeding, stop with the boot sequence in reverse order;
4, feed particles strictly delineated requirements, prohibit more than delineate material into the crusher, to avoid clogging the impeller channel and central feeding tube, feeding continuously strive average;
5, the device stopped moving when nesting, feeding should be resting;
6, Sand operation process, if severe vibration and abnormal noise, parking should be immediately checked;
7, Sand each work group when adding the right amount of grease;
So in addition to operational use to ensure safe operation of equipment, but also to take protective measures to improve as much as possible, more than seven requirements must be followed.

     Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.