Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
  When the block brick can use a lot of raw materials for production, such as sand, fly ash, mine tailings, stone, construction waste, etc., the use of raw materials, according to block brick, gelling agents, production conditions, different environments, production the process model used is different.
In general, the common model has the following three:
1 full mode. Generally used in silicate concrete unburned. This model is very complete process, material handling good effect, high-quality brick, block brick produced excellent final product performance. Therefore, this is completely process model is the best recommended mode of production. Its disadvantage is a longer process, production sites need a larger amount of staffing is also more than any other technology, investment in equipment about other processes. However, consideration of bricks of quality assurance, it is still the ideal model.
2 Simple mode. This mode is mainly used in iron tailings unburned. Simple mode and full mode ratio, is not the main agitator and digestion compartment. After this process the material in the metering wheels grind directly into the brick machine is to replace two wheels grind stirring, grinding wheel after molding, without digesting. This process of forming effect can be, but also to ensure the brick appearance quality, but its intrinsic quality is far better than the previous two models, but also the quality of unburned will be greatly affected. Therefore, this model is not very good, do not advocate the use. However, in order to reduce investment in equipment and shorten the process and choose this simple model, however, is detrimental to product quality.
3 incomplete mode. This mode is generally used for fly ash unburned. Incomplete model is a simplified full mode. This model eliminates the need for pre-mixing, the rest of the process is complete. Therefore, it is still relatively good process effect, block bricks and has a good quality assurance. After its material in the grinding wheel, but also by the biaxial forced stirrer, so uniformity and plastic than ideal, completely unburned after molding quality craft patterns. However, due to eliminating the pre-mixing, its effects and full model compared to brick, or have some less.
     Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.