Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
Crusher in the use and maintenance of the entire life cycle of crushing equipment is a critical step in, know how to use and maintain their crushing machine, you can make your machine a longer life cycle, the following is your must-see crusher knowledge:
Preparations one, before starting
       One, carefully check bearing lubrication is good, whether the connection brackets have adequate lubrication can.
       2, double-check that all fasteners are fully tightened.
       3, carefully check the drive belt is good, if they are damaged, so they should be replaced. When there is oil on the belt or pulley, sweeping movements cloth to wipe applications.
       4, check whether the ore crushing cavity or debris. If or when the ore debris must be cleaned to ensure no-load starting crusher.
       5, check whether the return from the top bolt, gasket if pressed, whether the T-bolts tightened.
Second, start
       1, after checking each part of the machine proved normal before starting.
       2, the crusher is only allowed in the case of no-load starting.
       3, prior notice must be starting with a bell or signal.
       4, after starting, if found irregularities, they should immediately stop running. After the identification and removal of abnormal conditions before they start (non-regular case with easy start).
Third, the use
       1, before feeding the crusher is operating normally.
       2, to be added to the crushed material should be evenly crushing cavity. Avoid lateral join or filled feeding, nesting in order to avoid overloading caused undue uneven and mechanical damage.
       3, under normal operating conditions, bearing temperature should not exceed 30 degrees, the maximum temperature should not exceed 70 degrees. When the temperature exceeds the above, should be immediately stopped, identify the cause and be discharged only after the starter motor.
       4, crusher parking before, you should first stop feeding until after the crushing cavity material is fully discharged before they turn off the motor.
       5, when broken, as a result of the crushing cavity material obstruction caused parking, should be immediately stopped, after the material is discharged before re-starting.
       6, one end fixed and movable jaw plate wear and tear, you can turn around and use.
       7, crusher in use for some time, should be tight elbow sleeve retighten prevent loosening tight elbow sleeve for machine-generated damage.
Four, lubrication
       A regular and timely attention to friction and lubrication of work to do to ensure the normal operation of the machine and extend the life of the equipment.
       2, the machine used grease should be based on the place of use, which determines the conditions, the use of calcium-based Under normal circumstances, sodium and calcium Kea grease.
       3, by adding grease to the bearing housing where the space volume of about 50%, and every 3 to 6 months to replace a application time of oil change gasoline or kerosene clean roller bearing raceway.
       4, before starting the crusher, you should inject the right amount of grease between toggle plate and brackets.
Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.