Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
No matter what device is used for a long time there will be a large and small faults, with the fault of course needs to be repaired, you need to solve the problem, common to brick equipment failures and some corresponding solutions. In the years to tell you about a few common faults and solutions.
First PRESS sudden stop that occurred stuffy car is due to packing too much, as long as the die hard objects falling into the hole, so that the piston rises while regulating the proper feeding depth or eliminate hard object to, proof cranes. When the rotary dial mechanism functioning but does not move is because automatic card spring break and malfunction, so you can just replace the spring. When rotating the rotary vibration is because the market between card and automatically dial back the impact of large, adjust the automatic card with a gap of not more than 1 mm below the market enough. When pressed a small brick thickness, three different types of dryer dryer works discriminant analysis, the reason is caused by poor lubrication under the back wheel thrust sheets, wear too much, as long as the improvement of lubrication, if push blade wear too large to be replaced. When the light brick machine running, must be installed on all shields and ground cover.
Check the electrical part of the ground wire to prevent leakage, short circuit and other phenomena, bellows bellows disturbing element analysis work. When the brick is not running, not allowed to start feeding mechanism, the hammer crushing machine workflow analysis, so as to avoid overload, loss of billet parts phenomenon occurs.

Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.