Use Mianshaozhuanji equipment can be said to us into an era of mechanized brick, which is an important sign of the times. In particular, this brick-making process, compared to traditional brick process easier, the entire production process, eliminating the step of traditional firing at full mechanization of production, we only need to table a reasonable operation and control, it is possible to produce a very high number of unburned.

    Automatic brick machine is a large number of materials processing drying equipment, generally applicable to granular materials. Many staff will find, automatic brick making machine in the course of work will be between abnormal sound gear, this is the case then how to do it?

    1, then you should check the size of the gear backlash, appropriate adjustments will be able to return to normal state. If it is badly worn pinion must be replaced. You can add Thick black oil over a large gear or gear cover.

    2, a larger force is repeated two gears. This phenomenon should check the exposure wheel bearing roller and belt. Asked the same set of wheels are not parallel or connect with two supporting roller is not perpendicular to the axis of the cylinder, gear wheel can cause excessive force while supporting wheel can also cause abnormal wear. The reason for this situation is the occasional round deviate from the correct position, as long as the recovery tug to the correct position, it can be solved.

    3, the discharge of materials containing moisture is too low, it should reduce the amount of fuel used or increase the volume of feed. But do not significantly increase or decrease in the raw material in the adjustment process, which will result in the discharge water content fluctuated, reach treatment requirements.

    Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.