Hydraulic system is used to transmit and transform energy use oil as a medium. This feature is to use the hydraulic system brings restrictions in energy conversion project, due to the low efficiency of energy conversion power loss makes almost all of the hydraulic system into heat, forming a hydraulic oil temperature. Especially in the working environment high temperature conditions, the oil temperature of the system is often beyond 60C, so often forced to shut down, and so on down the oil temperature before turning on power to stop spending, so not only seriously affected the yield, but high oil temperature so viscosity reduction, wear large hydraulic systems, resulting in a hydraulic system performance landed, the action slowed down, forming pressure is reduced, and often deformed due to the aging of the rubber seals produce hydraulic oil leak, the formation of downtime maintenance. In order to better protect the hydraulic system, in daily use should strictly enforce the rules.

    The daily management of the hydraulic system

1, to request the use of personnel complete hydraulic system to a large extent the mechanical, electrical, hydraulic integration, high level of automation, maintenance and management of its request to have higher than other building materials equipment. More importantly, the request for managers: have more substantial mechanical, electrical, hydraulic and pneumatic control aspects such as knowledge, equipment maintenance personnel should have a certain fitters, electricians, hydraulic knowledge and so on.

2, stricter enforcement of rules

Equipment management and operating personnel, it should focus on skillful control every aspect of the rules, and to abide by strict, with particular emphasis on the following points:

(1) before starting the pump check. Necessary checks before starting the pump tank oil level and oil temperature, if the demand for oil supplement, it is necessary to use the same oil as the original brands, and fuel tank dedicated to the oiler, if the oil temperature is below 15C, the system should be good under load run 20 minutes or more. Check all hydraulic components and external components can execute in the reset state.

(2) after the pump start-up and inspection. Start pump no load operation five minutes, look at the system pressure, noise, vibration indication signal whether the normal, if found to have anomalies, shall immediately suspend the operation of the pump, reason to be identified and treated accordingly restart the pump.

(3) the system during operation checks. In the hydraulic system stable job, in addition to keep an eye oil, oil temperature, pressure, noise, always, but also check the working condition of each car pressed parts, pay attention to the oil spill of the entire system, vibration, pressure, throttle speed etc., in a timely manner to eliminate problems found problems.

      Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.