Use brick machine equipment can be said to be us into an era of mechanized brick, which is an important sign of the times. In particular, this brick-making process, compared to traditional brick-making process more simple, the entire production process, eliminating the traditional firing step in fully mechanized production, we only need to table a reasonable operation and control, it is possible to produce a very high number of unburned. Secondly Shandong wins Asia Machinery brick machine has a very characteristic, that is, simple appearance and operation, suitable for use brick now. Hydraulic cylinder which is a whole host of automatic brick machine power source, no problem protecting the hydraulic cylinder is the most basic needs of maintaining brick machine is located.

      So, automatic brick machine hydraulic cylinders should be how to care for it?

      Hydraulic oil quality must be better

      Strict selection of hydraulic oil in accordance oil specification. Selection of good quality hydraulic oil, hydraulic system can effectively avoid bubbles presented during the operation. In the selection of oil, should be chosen based on the lowest temperature is not the same area, and then filling the hydraulic oil dipstick specification, together with the need to pay attention to the hydraulic tank cleaning operations inside (filling hydraulic oil, avoid moisture and other impurities into), often see oil hydraulic oil, oil level and oil color, if it is found when the hydraulic oil showed blisters, bubbles, or fluid becomes milky, should seriously find the origins of oil in the air and in a timely manner to eliminated.

     High oil temperature solution

     Rational planning cooling system to avoid high oil temperature, oil temperature is the key to adhere to normal. If showing abnormal, should find the reason, remove promptly. When operating the hydraulic control lever and dispense valve, to seek a smooth, not too fast, too fast, nor too frequently to increase the engine throttle to minimize the impact of hydraulic oil to the hydraulic components. Together, but also in a timely manner to protect the cooling system, so that the temperature of the cooling system of the stick in the appropriate range, the bubbles break when dropped to release energy. Without affecting the normal circulation of the cooling liquid together will be able to appropriately increase the quantity to inhibit corrosion preservative enhancer.

     Selection of hydraulic system components

     Normal clearance contact surface of the hydraulic components in the production or repair of the hydraulic cylinder primary parts (such as the cylinder piston rod, etc.), should be installed in accordance with the lower limit of the size of the installation tolerances, practice has proved that the gas can be an excellent way to cut eclipse occurs appearance. If the hydraulic components have been presented cavitation appearance, you can only choose metallographic polishing sandpaper to remove cavitation pitting and surface deposition, must not dispose of the usual polished fine sandpaper.

     Precautions during repair

     Repairs to the hydraulic cylinder exhaust note after the repairs, the hydraulic system must work smoothly moment, so that the hydraulic system of hydraulic oil to get plenty of circulation; If necessary, the hydraulic cylinder inlet pipe (or return pipe) demolition open the hydraulic oil spill, to reach the exhaust single action hydraulic cylinder.

      Shandong Sheng Machinery Co., Ltd. has been dedicated sub-cement products machinery research and development, production and sales, with advanced equipment, superb technology and two years of professional experience, the company has always been at the forefront of research and development center block making machine market development , watching the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.