Brick machine production line bucket elevators, mostly vertical hoist, bear the full weight of its base of equipment, it must be checked on the basis of pre-arranged installation.
Installation of hoist in the following order: Based on the erection of foundation bolts according to the drawings, and then securely mounted on the lower section, based on the chassis and then connect to the lower middle section, the connection is completed before connecting the upper section; then install transmission platform, installation reducers, motors, couplings and other components in the protective cover drive platform; and hand rotation speed reducer shaft to check whether the smooth rotation of each unit easily.
   To prevent the offset to the side hoist must install the support means in the upper section. The device should be firmly secured to the building of this machine accessories, and should not restrict the free expansion unit in the vertical direction.
When the metal components of the machine design is completed, start assembling the hopper, tape, and finally put on about half cover.
In the hopper assembly of the tape, the first section of the required length of the tape cutting, strictly in accordance with the drawings on the tape is calculated by the perforation line of the hopper is fixed in order to ensure a correct pitch and the hopper configuration, the sheet must not exceed the permissible deviations.
Bucket elevator debugging:
Lubricated by product description for the lubrication of the oiling;
Hand-driven operation of the system, in principle, to enhance the bucket run more than one week after the correct way to move the drive motor to enhance the operation of more than a week when the bucket can be operated continuously under guardianship.
   Shandong Sheng Machinery Co., Ltd. has been dedicated sub-cement products machinery research and development, production and sales, with advanced equipment, superb technology and two years of professional experience, the company has always been at the forefront of research and development center block making machine market development , watching the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.