Avoid burning unburned brick production process is as follows:

        A filler in the top position of the turntable is feeding mechanism, the feeding mechanism to feed one end of a tank barrel bore hole communicating with the turntable mode, there is constantly rotating barrel feed scraper, the barrel pressed brick material (enter from the top of the feeder) constantly Guajin mold hole, fill the mold cavity (each module there is a hole in the mold, the mold hole space called the upper mold cavity), this process is known as filler, also called feeding, charging is performed when the turntable standstill.
        Die hole after filling with preloading turntable rotation, the rotation from B to C, since the one with a circular turntable track, B to C rail height is gradually increased orientation and therefore a mold for the die orifice for lifting, and the orientation of the die orifice was closed catchy pressure member, the cavity in the blank mold i.e. increase compression, which is the initial mold from the top rail of the brick press, called preload the process is carried out in the rotating turntable. Some disc rotary Mianshaozhuanji no preload process.
      After the suppression of the blank after the die hole after preloading reach C, the lower the pressure in the direction of rotation of the crankshaft brick piston is driven from the top unburned bodies, facing the top of the mold pressure, piston reaches the top, mold blank wells were eventually compressed to become brick, that is the end of the pressing process, a process known to suppress, or call pressed brick, is carried out when the turntable standstill.
     Roof tiles pressed brick finished rotating the die hole, when it is rotated from D to E, the height of the orbit orientation is gradually rising, so when the mold from the top, so the top of the brick will reach E, bricks turn out to be the top disk this process is known as the top brick is carried rotating turntable, then manually remove adobe loaded car, go to the next step (autoclaved).
     Shandong Sheng Machinery Co., Ltd. has been dedicated sub-cement products machinery research and development, production and sales, with advanced equipment, superb technology and two years of professional experience, the company has always been at the forefront of research and development center block making machine market development , watching the advanced technology at home and abroad, to develop products for the investment needs of different users. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.