Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
   Any cement brick machines are relatively maintenance needs, in order to extend the life of cement brick. The following 10 kinds of mechanical maintenance methods can hope to extend the working life.
1 month must be given hydraulic cement brick bearing plus fight butter to ensure the bearing lubrication.
2, must be cleaned weekly hydraulic cement brick stove on toner, in order to prevent inhalation of the drum, contaminated clothing.
3, must be cleaned once a month hydraulic cement brick exhaust pipe and elbow, if not clean up, the spacer time will be longer, and the excessive cotton obstruction, could easily lead to a fire.
4, machine operation is finished, turn the temperature adjustment knob clamor to 0 ° position, in order to reduce improper power, extend the life of the solenoid valve. 5, if part of the dry cleaning to pad shall be completely volatile residues and other agents on clothing, put can be put into the machine.
6, periodically clear the cotton residue hydraulic cement brick on the temperature probe, temperature regulation when found clamor and thermometer temperature is too large, usually about +5 degrees, a temperature probe is not likely to be put away, the two can be temperature probe there batt.
7, generally when the hydraulic cement brick dry cleaning pads, cement brick preheated to 80 degrees, then turn off the gas, hit the cold for 20 minutes.
8, hydraulic cement brick laundry drying temperature is set according to the conditions set correctly pad itself, in order to avoid the phenomenon of clothing has shrunk.
9, must be cleaned each day before using hydraulic cement brick cotton filter, such as filter clogging, air flow will be reduced, the chance of fly ash cement brick pad slow drying quit the phenomenon, but also a waste of energy.
10, cold "timer setting, usually" about hot "cement brick timer 1/4.
Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sale of advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.