Equipment Mianshaozhuanji, brick machine, brick machine, hollow brick, road brick, brick Shandong Shengya Machinery Co. Ltd. is a company specializing in the production of various types of veteran manufacturers.
How to install the mold brick?
An upper die, will need to replace the mold installation came from the mold box, the lower die on the vibration platform supporting plates on Dian Yousan, the lower die on both sides of the 4 hole and 4 trees on both sides of molding machine bolt positioning sliding sleeve on the positioning board accurately, slowly die lifting.
Two, waiting for the above 4 trees all bolts from the 4 hole of the lower mould in the show, stop rising, the plate vibration platform out.
Three, with a flat on the lower die plate above, will press mold carried in the plate above the lower die, slowly lifting, waiting for the upper mould and the lower mould plate after slight contact will cease to ascend, align the 4 hole die and the upper die of the connecting plate, cushion flat washer, insert the bolt, screw on the nut, do not tighten.
Four, will remove the pallet, the press die slowly raise, waiting on foot to the lower die is molded and usually prevail, stop rising, start on the vibration, vibration time is 3-5 seconds after shutdown, will die down all the connecting bolts fastening.
Five, empty machine running slow lifting upper and lower die, lower die clamping is observed, if there is friction and clamping phenomenon, should be adjusted to the main mode is not card.
R & D, production and sales of Shandong Shengya Machinery Co. Ltd. has been committed to the cement products machinery, advanced equipment, superb professional skills and twenty years of practical experience, the company has always been at the forefront of the market development research center of the block forming machine, attracted the attention of domestic and foreign advanced technology, developed for different the user demand for investment products, the main building block forming machine, hydraulic tile machine, cement pipe machine, mixer, suspension roller machine, wire rod machine equipment etc.. At present, 19 offices and 6 foreign branch (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.