Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
    Cement brick brick machine is a multifunctional device that can be used to produce a variety of abrasives by replacing cement brick products, such as standard bricks, hollow brick, brick, brick pathways, etc. These are now on the market is hot type pins, but replace the abrasive cement brick is very important to find out more about cement brick to replace the abrasive is important to note some of the details.
After the first, the first is the demolition abrasive, after the demolition of the mold cleanup can be unloaded after the second use, so we should pay attention when the demolition unloaded, the first mold box and die to rise hook location bite the hook, and then drop the mold box , when the mold box fell to the bottom stop, will be placed on a pallet mold box, and then the mold box increased the pressure on until the die head and mold box wooden pallets down after contact,
Second, will die and die slider full release screw connection block is removed, and then start stripping the motor, then die and mold box while falling, to be down to the bottom of the stop, lift will die down. Then rose to 200mm mold box is stopped, then the bottom of the mold box pallets full pads, remove the fixed mold box of four bolts, start stripping the motor, so that the mold box shoe drop to the bottom, then the mold and the mold box Box slider from the mold box carried away.
Third, installation, installation of new mold abrasive is also very important, first slide down to the bottom of the mold box, will be placed on three pallets vibration platform, and then carried to the mold box mold box slider Start lifting motor, together with the slider until the mold box mold box contact stopped rising, along with four stations will die column wire springs, with stand stud fixed on slide mold box, remove the vibrating table wooden pallets, lift motor start until after the die and die slider slight contact, stopped rising.
Fourth, with the coupling block will die and die slider loose connection, start lifting motor whereabouts mold box, the wooden plate after removing the mold box, and then start the lift motor until the die pressure head down into the mold box and catchy this level, stops rising, vibration 3 ~ 5S shutdown on startup, will die connection block screw it, then start lifting motor, whether there is friction between jamming phenomenon observed with the die and mold me die, if you want to timely adjustment between the die until the mold box and up and down freely.
Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.