Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
Mianshaozhuanji variety of problems can also occur when used for the production of these issues arise we did some detailed solutions.
1, which happened PRESS Passed boring car parking
Because too much filler, die hard objects falling into the hole

The piston rises while adjusting the appropriate depth or eliminate hard object feeding

2, the normal operation of the rotary mechanism but does not move the dial

Automatic card spring break and malfunction
1), automatic card head wear too much, replace the spring
2), replace the automatic card

3, rotary tape rolling vibration

1) between the card and automatically dial back a greater impact

2), a roller die on the track is not working on the move

3) Adjust automatic card with the broader market following the clearance of not more than 1 mm

4), repair or replacement of stuck roller

4, press the small brick thickness

1), caused by poor lubrication back wheel under the thrust piece, excessive wear

2) differences PRESS eccentric shaft position adjusting mechanism suitability

3) improved lubrication, if pushed too large blade wear should be replaced

4), align the eccentric shaft to the right temperature until

5, the entire thickness of the extruded brick larger

1) Pressure Piston roof tiles wear;

2) PRESS configurations all bearing wear too much;

3) pressure parts underside with the broader market gap is too large;

4) excessive wear at the bottom of the mold;

6. Individual adobe brick heavier than normal

Individual mold roller channeling too much damage resulting packing depth increases

Replace the mold wheel

7, the moment of the crankshaft and transmission shaft vibration pressed brick

Gear worn unevenly

After a change in the direction of the fixed ring gear on the crankshaft that half turn

     Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.