Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
    Ash is an industrial waste belongs in the past are to be treated as waste, but now using a new cement brick brick equipment, the fly ash as the main raw material used to make cement bricks, fly low price, and extensive resources that can be said to be a get rich quick program. Here's a look at the cement fly ash brick making process.
Fly ash bricks wet mix all the solid particles are powder, transfer to the pressing force is relatively slow, the material inside the frictional resistance is larger, thus pressing force attenuation when passing inside the brick is also large. So the use of fly ash brick pressing instantaneous way, is not easy to make a uniform and dense brick presses. Also due to the need to use more fine-grained powder of water wetting and adding more lime and gypsum, in the wet mix manufacturing process, compared with the first two tiles wet mix to generate more gelling material, although increasing the viscosity of the mixture, but it hinders the molding air is excluded from the smooth brick. More brick in the residual amount of air and moisture will cause more extreme lower molding pressures.
Fly belongs is powder, in the production of cement bricks need to add some aggregate, if the simple use of fly ash, made out of cement blocks, although look beautiful, but the intensity of reach, easy to crack broken cement blocks, general use Adding fly ash content in the semi-thirds of fact, you can take advantage of the crushed aggregate construction waste, or powder, add twenty percent, cement content in eight to ten percent, do so out of cement brick exterior delicate, high strength, more welcome by the market.
Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.