Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
    Cement brick equipment is composed of several parts, in use for some time there will be some glitches, to explain in detail the following equipment failure cement brick solutions prone.
First, cement brick relief: relief valve damage should be repaired or replaced, too many impurities in oil orifice blockage, should clear the orifice, spring damage the spool does not move freely, replace the spring.
Second, cement brick hydraulic: pump parts damaged so the gap is too large, resulting in inadequate flow or pressure fluctuations, should repair or replace worn parts, pump seals and into the air is not good, you should adjust the seal, to pump inlet section is too small, Suction poor, replace the cut is large enough to replace the section of the suction pipe, oil viscosity is too high, a large flow resistance, replace the appropriate viscosity hydraulic oil, oil filter clogging, the filter should be cleaned or replaced.
Third, cement brick hydraulic system: suction pipe Mifengbuyan inhaled air, should tighten the screws at the close, to ensure a good seal, the oil shortage in the tank, it should come on to the oil marking, suction pipe is too small in the oil below the surface When should the oil suction pipe to move in deep enough position in the oil return pipe mouth than leaving a large amount of oil splashing foam tubing should be immersed in the oil under certain deep position.
As long as customers in the production of more attention to the maintenance and replacement of wearing parts than parts of our equipment would not be a big problem, it will not affect the normal production, but will effectively extend the life of cement brick.
Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.