Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
Mianshaozhuanji material is very extensive: gangue, river sand, fly ash, waste, construction waste, slag, slag, powder and so on. Mianshaozhuanji raw material particle properties, including surface texture, shape, material particle size and particle size distribution.
     If the material surface is smooth, rounded, and its ability to bind and cement mutual on the poor, unburned intensity decreased. If the surface is rough, irregular, honeycomb, its surface will be a good combination, the second increase in the strength of unburned. If the surface is porous, unburned absorption is high, frost resistance is poor. Therefore, the raw material requirements of dense tissue surface, rough and irregular as well. If so smooth rules should be processed. Destroy its surface state.
     Also the particle size distribution of raw material is more important, the greatest influence on unburned, especially vibration molding products. The more different from its particle size, grading, the more the better the quality. Small particles can fill a large particle porosity, so that the density of the brick increases. If the particle size of the same, can not fill the void with each other, then the density of the poor. General requirements for wider particle size distribution, particle machine with at least more than five. For example, 0.5mm to have some, there should be some 0.8mm, 1.5mm should be a little more some, 1.8mm can be more, it should be less than 2mm of some, but still there is a certain percentage, but more than 3mm some small particles necessary, 5mm above particles should be minimal, should be no greater than 10mm. Mianshaozhuanji particle size distribution of raw material needs were determined by sieving.
     Shandong Sheng Machinery Co., Ltd has been committed to cement machinery products development, production and sales, with advanced equipment, professional and technical skills, and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of the user, the main block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.