Shandong Sheng Machinery Co., Ltd specializes in producing various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
Automatic hydraulic brick machine need to rely on hydraulic oil to control the movement of the hydraulic cylinder. As the hydraulic system configuration Mianshaozhuanji more complex, so the need to pay particular attention to the use of hydraulic oil.
In order to prevent automatic brick machine hydraulic system temperature is too high, you should be careful not to temporary overload, a cooler not to be contaminated oil to prevent dust adhesion, affecting heat dissipation. Keep pump station has enough fuel to facilitate the circulation heat the oil. Do hot summer day operations, to avoid the midday heat time. When the oil temperature is too low viscosity hydraulic oil Mianshaozhuanji large, poor mobility, resistance is increased, the impact Mianshaozhuanji efficiency. When the hydraulic brick machine oil temperature below 20 ℃, hydraulic oil Mianshaozhuanji sharp turns easily damaged hydraulic motors, hydraulic valves, oil pipelines in the oil circuit. At this point the need for brick warm-up operation, the starter motor, idle for 30 minutes after the load, speed throttle to increase the engine speed, the control of the handle to make any Mianshaozhuanji an action line to the limit position, adhere to 30 minutes to make Free brick machine hydraulic oil through the overflow warming.
If the temperature is lower then the warm-up operation requires an appropriate extension of time. When the oil temperature anomalies, smooth hydraulic oil film strength will decrease accelerated mechanical wear, carbides and silt generation ballast, oil oxidation accelerate oil deterioration, premature aging and other high-pressure hose seal.
  Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block making machine market development Follow the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. At present the country with 19 offices and six overseas branch (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.