Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
What factors will affect the quality of construction Mianshaozhuanji?
     1, block brick machine equipment in the transport, loading and unloading process, throwing and dumping is prohibited. After entering should varieties, specifications were neatly stacked, stacking height must not exceed 2M, and should prevent rain.
     2, age Mianshaozhuanji masonry wall should be more than 28d to the masonry.
     3, when using special mortar for masonry, masonry cement brick machine should be less than 15% moisture content and dry masonry. When using ordinary mortar for masonry in controlling moisture content, it should also advance 1-2d watering moist. When the hot season masonry, masonry surfaces should be watering the right amount.
     4, the cutting block should be using portable equipment or the appropriate equipment.
     5, the front masonry wall design requirements should pop up the middle, with the doors and windows sideline hole location, and the number of rods should be marked skin, pull a good level line. Well arrange masonry block design. And proper control of the daily masonry speed.
     6, filling the bottom of the wall should build high-strength brick, such as sand-lime brick, shale brick, concrete brick. Height of not less than 200mm.
     Seven different dry density and intensity levels should not be mixed masonry blocks, nor other brick, block puzzle mix.
     8, cement brick machine equipment and the transfer of parts of the masonry corner should also masonry. You can not turn on the masonry must stay, temporary discontinuity should brick ramp Croucher.
     9, cement brick machine masonry infill walls Rachel lien position should be consistent with the block of reinforced leather number. Its steel frame should adopt fixed anchorage column. Its specifications, quantity, spacing, length should comply with the design requirements. Mortar filling the gap between the wall and the frame column filling them dense.
    10, when the masonry masonry brick machine, should strictly control the level of flatness. And shall take the wrong seam puzzle, puzzle length should take less than a third of the length of the block. Puzzle does not meet the length requirement ride through the seam should not be greater than 2mm.
    11, gray seam thickness and width of the brick machine masonry should be correct, its horizontal and vertical gray gray seam thickness slit width of 15mm and were advised to 20mm. Masonry horizontal and vertical mortar plumpness should ≥80%. Meanwhile the appropriate horizontal masonry joints, vertical joints were pointing, pointing depth 3-5mm.
    12, when the masonry wall filled to near the end of the beam, should stay a certain gap, and should be an interval of at least after 7d, the use of side brick, brick or block legislation oblique puzzle tight squeeze, it should be about 60 degrees inclination, masonry mortar should full.
    13, the wall size tolerance, such as the displacement axis, vertical, surface flatness, width and offset the high window and door openings, etc. should be controlled within the specification range.
       Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.