Shandong wins Asian machinery specializing in the production of various types of brick, brick machine, brick machine, hollow brick, brick pavement and other equipment of the old brick factory.
Unburned slag cement masonry certain content of the slag using water mixed with a small amount, no firing, after nature conservation from the new tiles. Its production process is as follows:
     1, slag: Family with slag residue or factory waste can be used. The best is loose granular facilitate mixing cement, and cement more fully integrated. If the composition of the carbon contained in the slag are more likely to form a massive, massive ground first and then the best incorporation cement.
      2, the choice of cement, can participate into 425 ten percent of ordinary portland cement, which can improve the strength and performance of brick milk, not easy to crack the water to enter, otherwise, there will be general brick cracking phenomenon.
      3, the amount of admixture: See the appropriate amount of additive, also known as booster. In addition to increasing the degree of solid brick, but also can reduce the amount of cement, greatly reducing the cost of unburned.
     4 Water: In the process of making unburned, whether you are processing slag unburned brick, cement or concrete unburned unburned etc., must pay attention to the water to join. The appropriate amount of water, high strength brick high. Forming less water, the strength of brick is bad, the material in the mold resistance is large, single-sided pressure. Brick ground is not dense. Forming more water, the bottom surface of the brick will be wet, the mold is easy to break something. When the water content of the slag was 3% - 5% to 10% water forming appropriate.
   Shandong Sheng Machinery Co., Ltd has been committed cement products machinery research and development, production and sales, with advanced equipment, professional and technical skills, and two decades of practical experience, the company has always been at the forefront of research and development center block making machine market development , concerned about the advanced technology at home and abroad, to develop products for the investment needs of different users, there are block making machine, hydraulic tile machine, cement pipe machine, blender, suspended roller machine, wire rod machine equipment. Currently has 19 branch offices and six foreign countries (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.